Boat Plans Bartender
src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiI0I35J-GPqerV9O7OBzwCAQ09qGDhbgORd8OM_erVXUCXoM24R2e9yczgkgwU0q1N8YrpqI3pTQxB3LeusvwX5Mfk6fToZYZV5ZEabbB8uUwGaUFz9HlX8AoSG6BKQCf42CL_lnMnY6aN/s200/DSCN1924.JPG" style="float:right; margin:0 0 10px 10px;cursor:pointer; cursor:hand;width: 200px; height: 150px;">
The plywood under-decking was bonded in place with temporary staples to hold it until the epoxy hardened. Then the plywood was trimmed around the sheer and cockpit. The process was repeated with cypress planks, about 3/16" thick. Now the planks have been sanded. Finally starting to look like more than just the hope of a boat. I need to glass the stern, recessed transom, and splash pan before glassing the deck itself.
Do you find information about Boat Plans Bartender are you looking for? If not, below may help you find more information about the Boat Plans Bartender. Thank you for visiting, have a great day.
The plywood under-decking was bonded in place with temporary staples to hold it until the epoxy hardened. Then the plywood was trimmed around the sheer and cockpit. The process was repeated with cypress planks, about 3/16" thick. Now the planks have been sanded. Finally starting to look like more than just the hope of a boat. I need to glass the stern, recessed transom, and splash pan before glassing the deck itself.
Do you find information about Boat Plans Bartender are you looking for? If not, below may help you find more information about the Boat Plans Bartender. Thank you for visiting, have a great day.
0 komentar:
Posting Komentar