Wooden Boat Plans Australia | Bruces Pontoons

Wooden Boat Plans Australia

We were planning to use Bruces pontoon boat that he scored somewhere around the Lake Shasta area as the base for our shantyboat.  In fact, it was Bruces pontoon boat score that gave us the greenlight for this project.  Not so sure about this now.  Every boat has a buoyancy, a certain weight that it can support safely.  Bruce writes:

I dont know how easy it is to calculate this. During high school geometry I had a crush on the Castellucio twin sisters (Karyn and Kathleen) and most of my mental energies were taken up by trying to flirt with the two of them rather than on the substance of the coursework. I havent really revisited the subject of geometry (nor, alas, the Castellucios) since that time.

The pontoons are sort of irregular shaped, they are flat on the top and sort of u-shaped on the bottom. The top to bottom dimension is 17 1/2". They are 18 1/2" wide.  As Ive mentioned before, the platform is 16 long. The pontoons extend another 18" to the rear of the platform. They also extend about 24" to the front of the platform. However, in the front they are tapering down to be much more narrow, expecially in that last foot.

Okay, Im gonna make some assumptions about Bruces pontoon boat.  Doing some crazy math that requires me to get out my geometry book again, I guesstimate the total cross-sectional area of the pontoon is about 2 sq ft.  To get the volume, we multiply that times the length. Well say that is 16 feet + another 1.5 ft at the back, and another maybe 1 foot at the front. For 18.5 feet. So the volume of one pontoon is perhaps 37 cu ft.

We just look at one pontoon, because we want to make sure that the capacity we work with never exceeds the floatation of one pontoon, lest a shift in weight drive it under the water and flip the craft. This situation even has an ominous-sounding name:  Pontoon Effect.  Plus, if you think about two pontoons, you want them both no more than half in the water.

To get the floatation, we multiply the volume times the weight of the same amount of water. Thanks, Archimedes.  One cu ft of fresh water weighs 62.4 lbs. So the flotation of one pontoon is 37 cu ft  * 62.4 lbs/cu ft = 2308 lbs. So the weight of the boat, plus the passengers, plus their gear and stuff, plus some margin of safety 10 to 25% should not exceed 2308 lbs.

Probably too tiny for our heavy shantyboat. However, we can build Bruces pontoon out to be a little hillbilly sun porch to accompany our shantyboat.  Something like this...

Do you find information about Wooden Boat Plans Australia are you looking for? If not, below may help you find more information about the Wooden Boat Plans Australia. Thank you for visiting, have a great day.

Read More..

Boat Plans Building | Think hard about gasoline

Boat Plans Building

WHEN THE DREADED day comes, and your old auxiliary engine finally decides to head for the great scrapyard in the sky, what are you going to replace it with? There’s almost complete agreement these days. You’ve got to get a new diesel, right?

But why a diesel? It’s not necessarily the right choice for everyone who owns a good old boat. In fact, it’s more of a fashion than a logical choice. There’s much to be said for modern gas engines with fuel injection and solid-state ignition.

The most popular reason given for choosing a replacement diesel is that it’s safer. But sailors who own diesels mostly cook with propane gas, which can blow a boat to pieces just as easily as gasoline can.

A gas engine is cheaper, smoother, and more powerful than a diesel of the same weight. It’s easier to crank, easier to repair, even for an amateur, easier to remove from the boat, and much quieter in action.

Gasoline engines in cars are designed to run about 3,000 hours, or 100,000 miles before they need an overhaul. Now, the average boat owner logs 200 engine hours a year, so, if you maintain it faithfully, it would take nearly 15 years before a gas engine needed an overhaul.

As for safety — your nose is very good at sniffing out very small concentrations of gasoline. Together with a bilge blower, run for five minutes before every start, it will virtually eliminate the chances of a surprise explosion.

So, when the time comes to replace your auxiliary motor, don’t be stampeded into diesel. Gasoline engines have been used in small boats for many decades. Consider their advantages very carefully before you make your choice.

Today’s Thought

To some will come a time when change

Itself is beauty, if not heaven.

—E. A. Robinson, Llewellyn and the Tree

Tailpiece

Notice outside a muffler shop:

“No appointment necessary. We heard you coming.”

(Drop by every Monday, Wednesday, Friday for a new Mainly about Boats column.)

Do you find information about Boat Plans Building are you looking for? If not, below may help you find more information about the Boat Plans Building. Thank you for visiting, have a great day.

Read More..

Wood Boat Plans And Kits | Math is Hard Calculating a Waterline

Wood Boat Plans And Kits

Who would have thought boatbuilding would involve so much math?

I was reading Glen L. Witts Boatbuilding With Plywood and realized what should have been obvious to me:  The waterline of a boat is calculated beforehand.  I guess it makes sense that boatbuilders dont guesstimate their designs only to drop their boats into the water and see what happens. On top of that, many of the handling characteristics of a boat are built into the design, including balance.

With our cabin shifted back from the center, this would shift the balance toward the back.  Add to that the weight of the motor and fuel and we have a potential problem.  So far, Ive been assuming symmetrical bow and stern as many barge boats feature, but in order to increase buoyancy in back and shift the center of buoyancy forward, I can reduce the rake in back to get more of the hull in the water there.  This explains some of the barge boat that did feature a smaller stern rake.  How would I go about calculating that?  That is something I will have to think about.

But as an interesting exercise, I can calculate the waterline height as a function of the rake angles, length and width of the boat, and overall loaded weight of the boat.

I had to go back to my algebra and trigonometry reference books to look up how tangent and the quadratic equation worked.  The last equation gives us the waterline height h_w as a function of

w = overall width/beam
l = overall length
h = height from bottom to deck (or to the top of the rake)
?b = angle of bow rake
?s = angle of stern rake
Vw = volume at waterline (= the weight of the displacement of loaded boat)

Simply put, the total volume of water displaced is equal to the sum of the water displaced by the bow, stern, and center.  The volume of each of these can be calculated geometrically as a function of our unknown, the height of the waterline.

We then solve for the unknown and get an equation in a quadratic form (the forth one from the bottom).  So we use the quadradic equation (which Ive always hated) to solve for h_w.

Taking our equation for a spin

Lets say the total weight of the boat plus gear plus people plus 25% safety margin is 7000 lbs.  Then the calculated volume of the boat at the waterline is 193,846 cu in.

Well say the boat is 8 foot (96 inches) wide, the length is 20 foot (240 inches), and the height from the bottom to the deck is 2 feet (24 inches).  The bow rake angle is 45° and the stern rake is a modest 10°. 

So plugging in the numbers, and taking the plus-or-minus of the quadratic formula into account, I get:

hw = 370 inches or -9.28 inches

So either my boat will have a waterline 31 feet above the keel (that is to say, the boat will be underwater), or it will float 9 inches out of the water. No wonder I always dreaded the math part of a real-world problem.

Checking my math... ah I forgot a negative sign!  New solutions:

hw = 9.28 inches or -370 inches

Thats much better.  If we throw out the negative solution, we have a waterline 9 and a quarter inches above the keel.  Cool.

Do you find information about Wood Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wood Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..

Boat Plans Bruce Roberts | Sketchy Napkin Plans

Boat Plans Bruce Roberts

As with all great projects, this one started with a napkin drawing:

 

While  barrel floats have a long glorious history, well probably do either pontoons or a full plywood-fiberglass hull.  

We wont need any kind of keel with pontoons, but with a full hull, the keel is still an open question.  Though apparently some plans call for a, whadyacallit, a skeg, like a short keel that runs the length of the hull.

Do you find information about Boat Plans Bruce Roberts are you looking for? If not, below may help you find more information about the Boat Plans Bruce Roberts. Thank you for visiting, have a great day.

Read More..

Boat Trailer Plans Australia | Inspiration

Boat Trailer Plans Australia

Looking around, shanty boats have been around for a long time.  The dream of living on the water is hardly new.  Shanty boats were the obvious choice for itinerant workers, miners, dockworkers, and farmers. And as living on land has felt more and more constrained, people have looked to the relative freedom of rivers, lakes, and seas.

From "Toward Defining Shantyboat Living" by Bryan Lowe (original source uncredited)

Here are some of the inspirations Ive found from various online sources.

Untitled by Alexey Sergeev

"Floating camp on the Ouachita River by FinchLake" by Scott Whitlock.

"Euro Floating Cottage" from Euroship Services.  Custom made floating cabins.

"Float Cabins on Powell Lake" by Kent Griswold.  Float cabins in Coastal British Columbia.

"Loggers floating cabin" by Darian Rawson.

"Floating Shack" by Sadieinoz1957.  A floating bluegrass stage on the Derwent River, Hobart City, Tasmania, Australia.

"Jack Kerns Shantyboat" by Bryan Owen.  Permanently anchored in a little bay off the beach on the Ohio River.

"Shantyboat Gals" from steamboats.com

Do you find information about Boat Trailer Plans Australia are you looking for? If not, below may help you find more information about the Boat Trailer Plans Australia. Thank you for visiting, have a great day.

Read More..